Robobrew All Grain Brewing System (35L/9.25 gallon)
There is no easier way for homebrewers to get directly into all-grain brewing than the new Robobrew. It is really intuitive to use and included directions and multiple online videos brewers help make it easy to learn. Because it is electric and runs on 110v power it is an easy plug and brew solution.
Dual heating elements run off of a single 110 volt plug and have individual switches allowing for more control over the heating process. One element is 1000 watts and the other is 500 for a combined 1500 watts! Use both when you need to ramp up the temperature quickly either at the start to get to your mash temp or to go from your mash temp to boiling. Use only one of the elements when you want to hold a temperature.
Also included is an on-board water resistant control panel for setting and monitoring temperatures. You can also set a delayed start of up to 23 hours in advance so that you can have your water hot and ready to go when you get home from work or get up in the morning.
This pump-less model is really extra simple to use and the efficiency is still amazingly good.
- Stainless steel 1/2 in ball valve
- Immersion wort chiller included (requires 1/2 inch tubing and a connection to your water source)
- Digital temperature controller
- Dual heating elements (1000 watts and 500 watts)
- Recommended max. grain bill - 18 lbs
- Recommended min. grain bill - 8 lbs
- 110 volt plug
- 21.625 in H x 12.5 in D
BrewHound review: I've brewed on a Grainfather and the Brewer's Edge Mash and Boil and the Robobrew honestly is the best of both worlds. The control panel is simple to use and is better than the Mash and Boil, and the temperature variation is much smaller - in my test the mash temp would drop 2-3 degrees before the heating element would turn on and bring the temperature back to mash temp without over correcting; the available jacket is a big help. I really like the mash basket - the bottom isn't fixed in place like the Mash and Boil (making it easier to clean and allows wort to pass through more easily) and there's no gasket to get in the way (I have friends who hate that gasket's tendency to pull away on the Grainfather mash basket). A recirculating pump is a great tool until it gets clogged or the intake gets knocked loose - that's where you really appreciate having a drain valve! The included wort chiller makes this a great package! If you're willing to work without a pump and use good old gravity, you'll love this brewing system.